462 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. oeg catalog 1308242 issued 3-03 (pdf rev. 11-04) www.tycoelectronics.com technical support: refer to inside back cover. features meet ul 508, csa and tuv requirements. ?1 form a and 1 form c contact arrangements. immersion cleanable, sealed version available. meet 5,000v dielectric voltage between coil and contacts. meet 10,000v surge voltage between coil and contacts (1.2 / 50 s). quick connect terminal type available (ozf). ul tv-8 rating available (ozt). oz/ozf series 16a miniature power pc board relay appliances, hvac, office machines. ul file no. e82292 csa file no. lr48471 tuv file no. r85447 initial insulation resistance between mutually insulated elements: 1,000m ohms min. @ 500vdc. mechanical data termination: printed circuit terminals. enclosure (94v-0 flammability ratings): oz-s: vented (flux-tight) plastic cover. ozf-ss: vented (flux-tight) plastic cover. oz-sh: sealed plastic case. weight: 0.46 oz (13g) approximately. operate data must operate voltage: oz-d: 70% of nominal voltage or less. oz-l: 75% of nominal voltage or less. must release voltage: 5% of nominal voltage or more. operate time: oz-d: 15 ms max. oz-l: 20 ms max. release time: 8 ms max. environmental data temperature range: operating, class a (105 c) insulation: oz-d: -30 c to +55 c oz-l: -30 c to +70 c. operating, class f (155 c) insulation: oz-d: -30 c to +85 c oz-l: -30 c to +105 c. operating: oz-d: -30 c to +55 c oz-l: -30 c to +70 c vibration, mechanical: 10 to 55 hz., 1.5mm double amplitude operational: 10 to 55 hz., 1.5mm double amplitude. shock, mechanical: 1,000m/s 2 (100g approximately). operational: 100m/s 2 (10g approximately). operating humidity: 20 to 85% rh. (non-condensing). initial dielectric strength between open contacts: 1,000vac 50/60 hz. (1 minute). between coil and contacts: 5,000vac 50/60 hz. (1 minute). surge voltage between coil and contacts: 10,000v (1.2 / 50 s). contact data @ 20 c arrangements: 1 form a (spst-no) and 1 form c (spdt). material: ag alloy (1 form c) and agsno (1 form a). max. switching rate: 300 ops./min. (no load). 30 ops./min. (rated load). expected mechanical life: 10 million operations (no load). expected electrical life: 100,000 operations (rated load). minimum load: 100ma @ 5vdc. initial contact resistance: 100 milliohms @ 1a, 6vdc. coil data voltage: 5 to 48vdc. nominal power: 720 mw (oz-d), 540mw (oz-l). coil temperature rise: 45 c max., at rated coil voltage. max. coil power: 130% of nominal. duty cycle: continuous. contact ratings ratings: oz/ozf: 20a @ 120vac resistive, 16a @ 240vac resistive, 5a @ 120vac inductive (cos? 0.4), 5a @ 24vdc inductive ( l/r= 7msec). 1/2 hp @ 120vac, 70 c. 1 hp @ 240vac. 20a @ 120vac, general use. 16a @ 240vac, general use, n.o. only, @ 105 c*. 16a @ 240vac, general use, carry only, n.c. only, @ 105 c*. * rating applicable only to models with class f (155 c) insulation system. ozt: 8a @ 240vac resistive, tv-8 @ 120vac tungsten, 25,000ops. max. switched voltage: ac: 240v. dc: 110v. max. switched current: 16a (oz/ozf), 8a (ozt). max. switched power: 3,850va, 600w. coil data @ 20 c oz-l sensitive rated coil nominal coil must operate must release voltage current resistance voltage voltage (vdc) (ma) (ohms) 10% (vdc) (vdc) 5 106.4 47 3.75 0.25 6 88.0 68 4.50 0.30 9 58.0 155 6.75 0.45 12 44.4 270 9.00 0.60 24 21.8 1,100 18.00 1.20 48 10.9 4,400 36.00 2.40 oz-d standard rated coil nominal coil must operate must release voltage current resistance voltage voltage (vdc) (ma) (ohms) 10% (vdc) (vdc) 5 138.9 36 3.50 0.25 6 120.0 50 4.20 0.30 9 78.3 115 6.30 0.45 12 60.0 200 8.40 0.90 24 29.3 820 16.80 1.20 48 14.5 3,300 33.60 2.40 users should thoroughly review the technical data before selecting a product part number. it is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application.
463 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. oeg catalog 1308242 issued 3-03 (pdf rev. 11-04) reference data wiring diagrams outline dimensions operating voltage operate time life expectancy pc board layouts (bottom view) ordering information typical part number b oz -sh -1 24 l m 1 f ,294 1. basic series: oz = 16a pc board terminals ozf = quick connect terminals ozt = tv-8 rating pc board terminals 2. enclosure: s = vent (flux-tight)* plastic cover (only available with ozf) ss = vent (flux-tight)* plastic cover. sh = sealed, plastic case. 3. termination: 1 = 1 pole 4. coil voltage: 05 = 5vdc 09 = 9vdc 24 = 24vdc 06 = 6vdc 12 = 12vdc 48 = 48vdc 5. coil input: d = standard (720mw) l = sensitive (540mw) 6. contact arrangement: blank = 1 form c, spdt m = 1 form a, spst-no 7. contact material: blank = agcdo (1 form c) 1 = agsno (1 form a, only available with oz....lm1 or dm1) 8. mounting and termination: blank = pc board terminals p = pc board and quick connect terminals (only available only with ozf-s-1..lm1p). 9. insulation system: blank = class a (105 c) insulation f= class f (155 c) insulation 10. suffix: ,200 = standard model for "ss" enclosure on oz and ozt ,000 = standard model for coil input "d" on ozf other suffix = custom mode l ,294 = standard model for "sh" enclosure on oz and ozt ,300 = standard model for coil input "l" on ozf * not suitable for immersion cleaning processes. 12 10 8 6 4 2 0.2 0.4 0.6 0.8 1.0 1.2 1.4 coil power (w) time (msec) release time operate time -40 -20 ambient temp. ( c) 20 % of supplying voltage to coil 0 20 40 60 80 100 40 60 80 100 120 140 160 0 180 120 140 operating votage range pick-up voltage cool coil hot coil applied maximum allowable coil voltage 13a 8a 8a 13a/16a 16a 100 contact current (a) operation (x 10 4 ) 10 1 0 2 468101214 16 18 20 240vac resistiv e oz ozf oz note: this data is based on the max. allowable temperature for e type insulation coil (115 c). ozf ozf oz 8 ?.059 dia (1.5) .295 .012 (7.5 .3) .197 .012 (5.0 .3) .197 .012 (5.0 .3) .600 .012 (15.24 .3) .300 .004 (7.6 .1) 1.02 .008 (26.0 .2) .394 .006 (10.0 .15) 2 ?.059 dia (1.5) 2 ?.047 dia (1.2) .945 .08 (24.0 .2) .300 .004 (7.6 .1) .098 .004 (2.5 .1) .266 .012 (6.75 .3) 1.14 .02 (29.0 .5) .165 .012 (4.2 .3) 1.02 .02 (26.0 .5) .073 (1.85) .394 .006 (10.0 .15) .394 (10.0) .047 (1.2) .047 (1.2) .047 (1.2) .024 .004 (0.6 .1) .134 (3.4) .2 .002 (.5 .05) .092 .012 (2.35 .3) .126 (3.2) .25 (6.35) .187 (4.75) .224 (5.7) .061 dia (1.55) (bottom view) (bottom view) (top view) * no electrical connection, for board attachment only. * .024 c (.60) .085 .012 (2.15 .3) .012 (.3) .157 .012 (4.0 .3) .047 (1.2) .047 (1.2) 1.15 .02 (29.2 .5) .295 .012 (7.5 .3) .811 .02 (20.6 .5) .504 .02 (12.8 .5) .012 (.3) .012 (.3) .197 .012 (5.0 .3) .197 .012 (5.0 .3) .59 .012 (15.0 .3) .073 .012 (1.85 .3) OZ-SH-105D,294 oz-sh-112d,294 our authorized distributors are more likely to maintain the following items in stock for immediate delivery. oz-sh-124d,294 oz-sh-105lm1,294 oz-sh-112lm1,294 oz-sh-124lm1,294 oz-sh-105l,294 oz-sh-112l,294 oz-sh-124l,294
|
